| FRONT |
|---|
| Control | Function |
|---|
| Input | Plug your instrument in here using a standard ¼" instrument cable. |
| Gain | This adjusts the degree of distortion. Cleaner sound is achieved at a lower gain setting. Higher gain settings will produce more distortion and sustain. |
| Volume | Adjusts the overall level or volume of the amplifier. |
| Treble | Controls the boost and cut of the upper frequencies. The Treble Control will make the sound brighter. |
| Middle | Controls the boost and cut of the mid-range fequencies. |
| Bass | Controls the boost and cut of the low frequency range. Clockwise adds lows frequencies, counterclockwise reduces low frequencies. |
Power
Indicator | Illuminates when the amplifier is on. |
| Standby | Toggle this switch when turning the amp on. Wait 30 seconds, before switching out of standby mode to promote longer tube life. |
| Power | Toggle this switch to turn on the amplifier. |
BACK |
|---|
| Control | Function |
|---|
| External Speaker Out | Using a standard ¼" speaker cable, you may connect another speaker here. The speaker (or speakers) should be rated at 4 ohms.
Speakers with less or more ohms will result in reduced performance. When the external speaker out is used, the internal speaker is
automatically disconnected and OFF. |
| Voltage Selector | Switchable 115/230 Voltage Selector |
| Power Supply | Power is supplied by a detachable power cord with an external fuse compartment. |
Specifications: |
|---|
| Output Power: | 10W (Max) |
| PreAmp Tube: | 1-12AX7 and 1-6L6 Valves |
| Speaker: | 8" Electar Labs Speaker (4 ohm) |
| Dimensions: | 360mm (W) x 180mm (D) x 310mm (H)
12.5"(W) x 7" (D) x 11.75" (H) |
| Weight: | 7.5kg (20 lbs) |
WARNING:
If amplifier fails to function, please contact a qualified technician. Do not attempt to service it yourself. There are no user serviceable parts inside. Under no
circumstances remove the back panel of the amplifier while it is connected to main supply. To reduce the risk of fire and electric shock DO NOT expose
this equipment to rain or moisture. This equipment must be grounded.
Warranty Information:
This Electar product is warranted by MusicYo.com. Details regarding this warranty are located on their website at www.MusicYo.com. If you are
experiencing problems or have questions, please email MusicYo.com at orders@musicyo.com.
|
