MusicYo.com - Tech Info

Electar Operation Manual Spartan Bass 60 amplifier

Thank you for choosing Electar!

If you're looking for a powerful yet responsive amplifier with great tone and features, look no further! The new SPARTAN line of amplifiers from Electar is here. With it's all transistor, IntelliTrans™ circuitry with Notch filter, the SPARTAN delivers a wide variety of deep, rich bass tones from its compact, closed- back and ported cabinet. Add to this… 2 inputs (Hi & Low), Volume, 3-Band EQ plus Notch filter, Line Out, Headphone Out and FX SEND/RETURN and you've got a bass amp you're gonna love!

Here's a list of the controls and their related function:

FRONT
Control	Function
Hi Input	Plug your instrument in here using a standard Ľ" instrument cable.
Low Input	This input can be used as a secondary input for an additional instrument or for instruments with higher output levels such as keyboards, drum machines, etc.
Master Volume	This adjusts the overall volume of amplifier. WARNING: It is a good idea to turn this knob to zero before unplugging and plugging in your instrument to avoid "popping" and possible damage to you speaker or ears.
Notch	The Notch control provides a powerful EQ device. By moving the Notch control from left to right (clockwise), you can significantly change the tone of your instrument from a "slap" sound to a "boom" sound.
Treble	Decreases or increases Treble frequency response in both channels. (+/-14dB @5kHz)
Mid	Decreases or increases Middle frequency response in both channels. (+/-15dB @830Hz)
Bass	Decreases or increases Bass frequency response in both channels. (+/-12dB @80Hz)
Headphone	Used to connect headphones using a standard Ľ" phone plug. Since the headphones are typically stereo, we have made this output so that the signal is always mono and equally distributed between left and right. When used, the internal speaker is automatically turned OFF. WARNING: Be SURE to turn your Master Volume to ZERO before plugging in headphones. This will avoid possible damage to your headphones and more importantly, your ears!! Also, prolonged listening at high levels may be hazardous to your hearing!!
Line Out	This jack provides an unbalanced output signal and a "hum-free" direct connection to recording and sound reinforcement equipment.
On/Off switch	Turns amplifier on & off. When on, the switch will illuminate.
BACK
Control	Function
Effect Return	Connect this to the output jack on the external effect unit. This can also be used as a Preamp In.
Effect Send	Connect to the input jack on an external effect unit. This can also be used as a Preamp Out.
Specifications:
Output power	60W (RMS), 65W (Max)
Speaker	12" Electar Labs Bass Speaker (8 ohm)
Effects Loop	Nominal Level -20dBV
Output Level	–1k ohm
Input Impedence	16k ohm
Dimensions	470mm(W) x 280mm(D) x 480mm(H) 18.5" (W) x 11" (D) x 18.9" (H)
Weight:	21kg (46 lbs)
Power consumption	150 Watts
Basic Use: Turn the Master control to zero and turn the On/Off switch to on. Using a standard Ľ" instrument cable, plug your instrument into the Hi Input jack of the amplifier. Slowly turn the Volume control up while playing until you are at your preferred volume level. Adjust the 4-EQ controls (Notch, Treble, Middle, Bass) to your preferred setting to achieve the tone you desire. Don't be afraid to experiment. WARNING: If amplifier fails to function, please contact a qualified technician. Do not attempt to service it yourself. There are no user serviceable parts inside. Under no circumstances remove the back panel of the amplifier while it is connected to main supply. To reduce the risk of fire and electric shock DO NOT expose this equipment to rain or moisture. This equipment must be grounded. Warranty Information: This Electar product is warranted by MusicYo.com. Details regarding this warranty are located on their website at www.MusicYo.com. If you are experiencing problems or have questions, please email MusicYo.com at orders@musicyo.com.